Expert Answers about Bungee Cords
- What is the Stretched Length of the Erickson Bungee Cord with Carabiners
- I spoke with my contact at Erickson about their Bungee Cord with Aluminum Carabiners # EM07039. My contact confirmed that the bungee will stretch approximately 1/2 the original length, making the stretched length approximately 4-1/2 feet, or 54 inches.
The bungee cord is not rated with a working load limit.
view full answer... - Hook Opening Size for SmartStraps Bungee Cord # 348509
- The hook opening of the SmartStraps Bungee Cord # 348509 that you referenced is 1 inch which is the standard size for similar bungees.
view full answer... - How Long are the EZ Grip Bungee Cords when Stretched Out
- I went out to the warehouse and pulled EZ Grip Bungee Cord, 32 Inches, # 3031DAT to measure it for you. The lengths listed are the un-stretched lengths. When stretched out, each model can be as long as twice the original length. About 64 inches for # 3031DAT.
I made a short video showing the elasticity of the bungee cords for you.
view full answer... - What is Hook Throat Diameter of Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10
- The dimension you are looking for on the Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 is 3/4 inches. That's the diameter of the "hook throat" which is where the cord fits through. It can fit cords that are between 1/4 inch and 5/16 inches.
view full answer... - Do SmartStraps Adjustable Toggle Ball Bungee Cords Have a WLL
- According to my contact at SmartStraps, the Adjustable Toggle Ball Bungee Cords # 3484003 do not have a specified WLL (working load limit) rating. They are designed for very lightweight applications only (less than 20 lbs). For instance, to wrap up cords and hoses or secure tarps canopies or tents, as shown in the attached photos.
As far as their construction, their outer jacket does have weather resistant coatings, however, they are not intended to be used for long-term or permanent...
view full answer... - Diameter of the Hook on the Master Lock EZ Grip Bungee Cord # 3031DAT
- I went and pulled a Master Lock EZ Grip Bungee Cord # 3031DAT from our warehouse to measure the diameter of the hook and found it to be 7/8 of an inch across.
I attached a review video for this product for you to check out as well.
view full answer... - Actual Size of Carabiners on Erickson Bungee Cord with Aluminum Carabiners EM07037
- I went to our warehouse and measured one of the Erickson Bungee Cord with Aluminum Carabiners # EM07037.
The carabiners themselves each measure 2-3/4-inches long x 1-1/4-inches wide measured to their outside edges. The overall end-to-end length, unstretched, on the sample I measured was 19-3/4-inches.
Since the actual length of this item might vary slightly from piece to piece the manufacturer specifies it as having a nominal length of 18-inches.
view full answer... - What are the Dimensions of the Hook Opening and Cord Diameter for the SportRack Cargo Net # SR0035
- I went out to the warehouse and measured the hook for the SportRack Cargo Net # SR0035 and found that the opening measured right at 3/4" and the widest point measured 7/8" so it should fit just fine.
The cord itself had a diameter of 1/8".
view full answer... - How to Carry a Ladder on the Back of an RV
- The Camco Chair Rack for RV Ladders part # CAM51490 has a 60 lb weight capacity therefore so long as your Little Giant Ladder does not exceed this figure you will be good to go. I can't say we have any racks for a ladder that are designed to attach to another ladder so this might just be your best option. In order to secure the ladder I would just use some bungee cords like part # EM07037.
view full answer... - What Extra Straps Can I Use with My 2014 Nissan Versa Note?
- I have a solution for you. The weight of the Rhino-Rack Rooftop Cargo Bag - Waterproof - 7 cu ft - 55" x 19-1/2" x 11-1/2" # RRLB200 is about 6 pounds.
As far as the straps, I saw from your previous orders that you ordered Rhino-Rack Vortex Aero crossbars # RRVA118B-2 from us. Usually, the Rhino-Rack Rooftop Cargo Bag is made to attach to the car's factory rail system. If your vehicle has a bare roof, we do not have a way to attach the side straps to your 2014 Nissan Versa Note's doors....
view full answer... - Dimension of Adco Tyre Gards for Tandem Axle with 28 Inch Diameter Tires
- The Adco Tyre Gard RV Wheel Cover - Double Axle - 27" to 29" Diameter - Vinyl - White - Qty 1 # 290-3923 is wide enough for your tires 62 inches end to end. Your axle spread on center is not uncommon and this cover is a fit. I reached out to the manufacturer and they said it is approximately 66 inches wide to account for proper fit and it has reinforced grommets for you to secure the cover to the tires with a rope or bungee cords like # EM06656 24", # EM06658 36" and/or # EM06668 42" .
view full answer... - Dimensions Of Mounting Plate For RodBuckle Retractable Fishing Rod Tie-Down Strap
- I have attached a photo of the RodBuckle Retractable Fishing Rod Tie-Down Strap, part # IMF14200. The photo has the dimensions you are interested in. As you can see, the mounting plate measures 2 inches tall so you should have no problem mounting it on your 2-3/4 inch Gunwale.
The photo also shows the dimensions for the bottom portion of the buckle system. This system comes with a template that you use to make sure the location has the room needed for installation.
view full answer... - Diameter of Tie-Down Holes of Lets Go Aero H01465 Hitch Mounted Cargo Carrier
- The holes around the edge of the # H01465 Let's Go Aero BigBoss cargo carrier are 3/8 of an inch in diameter, so the S-hooks of some ratchet straps would fit. The sides of the carrier are pretty sturdy, but I could see how the carrier box could be deformed if the ratchets were ran down too aggressively. I'd say that the holes are more meant for bungee cords or a cargo net such as what's included with the # H01496 Cover/Cargo net. I'll link you to a product demonstration video featuring...
view full answer... - What is the Stretched and Unstretched Size of the Individual Squares in Erickson Cargo Net # EM01015
- The Erickson 72-inch x 96-inch Cargo Net for Pickups, part # EM01015, features a bungee-cord construction intended to hold down lightweight items. It is not specifically rated for any particular weight load as it is intended to hold items down, but not to suspend them. It is not intended to support the weight of cargo or a person.
The individual squares measure roughly 4 x 5 inches when not under tension (as when removed from the packaging) and when under tension (stretched to a degree...
view full answer... - Can Inflatable Boat and Outboard Motor be Safely Carried on Aluminum Cargo Carrier on 2010 Mazda 3
- Based on what you have described the aluminum carrier should have no problem handling the 200 pound estimated weight of the carrier and boat/motor combined. You will just need to make sure not to exceed the capacity of the trailer hitch on your 2010 Mazda 3. Since you are right at the hitch capacity it would be a good idea to stow the motor in the vehicle it at all possible.
You can reduce the stress on the hitch receiver by also using a stabilization strap such as # 18050, or another...
view full answer... - How Much Weight Can Be Carried on Hitch Cargo Carrier on 2007 Pontiac Solstice
- From your purchase records I see that you have purchased the Draw-Tite Sportframe Class I Trailer Hitch 24833 is designed to fit your 2007 Pontiac Solstice and is no longer available. The trailer hitch has a Class I tongue weight rating of 200 pounds.
Since Pontiac determined that your vehicle is not designed to tow a trailer, there is no stated maximum tongue weight capacity for your Solstice in the owner's manual and any weight carried on the hitch will be carried at your own risk....
view full answer...
Go To Results